Charge Air Connector Clamping Instructions |
 Use only T-bolt style clamps. Constant torque T-bolt style clamps may help to retain clamp load. Torque to 70-75 in - lbs.
|
Coolant Hose Clamping Instructions |
 |
| Worm
gear or constant torque type stainless steel clamps with inner liner are recommended for silicone heater and coolant hose. Initial clamp torque should be 40 inch-lbs. If re-torquing is required, it should be limited to 20 inch-lbs. Do not
use serrated, slotted, or wire type clamps. |